Related products
PAD-Star® Blue Taxiway Lights – ICAO & FAA Compliant Low Voltage Solar or Mains Powered LED helipad lighting system with both visible and Infra-Red (IR) LEDs.
Taxiway lights are one of the most important safety features on your helipad.
Download factsheet for ICAO Certification Document
Key Product Features:
- ICAO Compliant: 3rd Party Certified(Intertek) International Civil Aviation Organization (ICAO), Aerodromes, Annex 14, Volume 2, Fourth Edition dated July 2013
Photometry – Chapter 5, Figure 5-11, Illustration 6
Chromaticity – Section 1.2.3 (LED)
- Very low power consumption: Approx. 3W (idle) and less than 30W max. (including internal winter heater).
- Low Voltage: Operates from 110-240V AC 50-60Hz or 12V -24V DC (ideal for solar and battery power supply).
- Variable Light Intensity: ICAO plus additional light levels for both visible and infra-red LEDs: 1%, 3%, 10%, 20%, 30%, 75% & 100%
- Simple helipad cabling: two core cable taken to each light.
- Smart installation, setup, control and monitoring: communication over the data cable to intelligent light drivers
FEC LED Blue Flush Mounted Taxiway Light
Flush Mounted
- Flush mounted lights can be used in place of an elevated light (pole or ground mounted) at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles.
- Flush mounted lights are strong enough to drive over without damaging the light.
HP2073FC
FEC LED Blue Pole Mounted Taxiway Light
Pole Mounted
- Pole Mounted lights are supplied with a 1" NPT aluminium mounting tube.
HP2063P
FEC LED Blue Ground Mounted Taxiway Light
Ground Mounted
- Ground mounted lights attach directly to the surface with your attachment hardware.
HP2093G